Precision slitting service

Our precision gauge tapes can be custom cut to the width you need, in all thicknesses from 0.03-1.0mm from the available materials. In the unalloyed steel DC04 and non-ferrous metals (except aluminium) the desired width is available up to 300 mm. The hardened carbon steel 1.1274 and the stainless spring steel 1.4404 can now be slit to any desired width up to 600mm, and the material 1.4310 to any desired width up to 1250mm (depending on the primary material) on our new slitting line.
Deburred or rounded edges are possible at an additional cost.
Depending on availability, the minimum length is around 50 meters; shorter lengths are also available for thicknesses over 0.80 mm. The strips can then also be provided with selfadhesive tape or cut to length. On request, the tapes can also be packed in plastic boxes or tin cans.

Sheets and blanks

The strip material in thicknesses from 0.05 to 1.0 mm can be cut to any length with narrow length tolerances using electronic roller feeds and cut-to-length shears, in all available dimensions up to a width of 1250 mm. In the thickness range from 0.40 to 1.00 mm, the parts can also be flattened using precision leveling machines. Formats from 1.1 to 3.0 mm thick and up to 400 mm wide can be cut crosswise to shorter lengths using special scissors

Edge processing

Edge processing with hard metal tools can be used to produce a deburred or rounded edges in all hardened or temper rolled alloys, in thicknesses from 0.20 to 2.0 mm and widths from 6 to 150 mm.
For technical reasons, a minimum length of 100-120 meters is required.

Applying of self-adhesive tape

Self-adhesive tapes of any width up to approx. 150 mm can be applied to our precision gauge tapes made of stainless steel or brass.
Different adhesive tape qualities are available to meet special applications. Depending on the recommended adhesive tape, the minimum length for this is approx. 50 or 100 meters. The strips can then be cut to your desired length.

Material marking

Our strip material is permanently marked with all relevant data using an inkjet printer, so that the material can be traced back to the smelting plant. In addition, other important information about the material properties is printed on the labels on our standard products up to 150mm wide.